We will show you how to plant the fenders, hood, bumpers, doors and bootlid.
In addition, we explain how to install seats and auto upholstery elements.
Time to assembly the body elements, as well as to complete the interior of the car.
The order of installing parts doesn’t matter.
If your wallet is empty, install what you have in the garage.
First, the SEAT REAR.
It is near the entrance to the garage.
The installation place is obvious.
Tighten it with two 9mm bolts.
Now, two front seats.
The one for a passenger can be reclined.
They are attached with four 9mm bolts, approximately in the corners of the seat.
Front fenders are marked as FENDER LEFT and FENDER RIGHT.
Look for five 5mm bolts near the headlight and on the top edge from the engine side.
HOOD is held by four 6mm bolts.
Search for them by looking from below at the front grille and headlights.
DOOR RIGHT and DOOR LEFT are attached with four 10mm bolts.
Look for them on the hinges - they light up even when the doors are closed.
The four 6mm bolts are directly under the rear glass, in the lid’s hinges.
GRILLE is attached with two 6mm bolts right next to the headlights.
BUMPER FRONT and BUMPER BACK are attached with two 8mm bolts.
BACK PANEL is attached behind the back seats - you don’t need any bolts here.
If you haven’t bought fancy speakers, choose one without holes.
DICE are on the desk in your room.
Hang them under the mirror if you like them.
This site is not associated with and/or endorsed by the Amistech Games or Amistech Games.
All logos and images are copyrighted by their respective owners.
