Press space bar and then E to look inside.
tap on the first red square.
Then, while holding R, inform Emma about the problem in module UN-03.
Now it’s possible for you to search the station.
Go to station map and connect to cameras in UC-01.
There you will find a computer.
In UN-02, connect the laptop to the power.
On it you will find a message from Mae (MM-JE - UNNECESSARY ROTATIONS).
Above the bed you will find a photo (MAE SPACEWALK PHOTOGRAPH).
In UN-07, you will find a laptop.
This one must be first connected to a power source as well.
On it you will find Jim’s message (JE-GC - EVENT MARKER APPROACH).
On the wall you will find a document titled BIOMEDICAL RESULTS: JIM ELIAS.
In UN-06, you will find a laptop disconnected from a power source.
In it you will find a message from Josh (JR-JE - RACTOR ON STANDBY).
In UN-05, scan the document that is on the box with the SPHERE EXPERIMENTAL NOTES documents.
On the wall you will find a piece of a newspaper (LANDMARK REASERCH ON OBSERVATION).
Move to cameras in UN-03.
First, connect the laptop to the power source and read two files in it.
Combine these files in SAM’s memory core.
In the same room, you will find three devices called COOLANT web connection NODE.
Each of them has a three-digit number.
Connect to the equipment and enter the proper formula.
Once you do it with all devices, connect to the screen called COOLANT connection HUB.
hit start, then on COOLANT connection NODE, on number 186, and on CONFIRM.
The first cooling system will turn on.
Do the same with the other two cooling systems.
Then, choose INITIATE, on HUB CONTROLLER, and on CONFIRM.
The whole cooling system on the station will start working.
You will get access to the Chinese space station modules.
In the CN-01, you will find a computer on the wall.
Before you use it, first connect its power supply.
You will read a message (AY-CCI - DATA DROP UPLOADED).
In CN-02, you will find a document to scan (CLIMATOLOGY THESIS).
Switch to camera B to scan schematics for Chinese modules on the wall (CN HATCH SCHEMATIC).
Log into SAM’s memory and combine these pieces of data.
Go to system alerts.
choose the next one.
Hold R and inform Emma about the lack of access to the equipment that tracks station’s crew.
You must repair three sensors located in modules UN-01, UN-03, and UN-06.
Connect to the machine on the wall called CREW TRACKING SENSOR.
press ENABLE SENSOR POWER CONTROL, then on ADJUST.
Keep pressing W until the bar is filled.
press ENABLE SENSOR CALIBRATION TEST.
select SENSOR CALIBRATION TEST.
On the left side of the green square you will see a square of random color generated.
Mark all squares that have the same color in the nearby picture.
You will change their color to green.
The sensor will start working correctly.
Do the same with the other two sensors in the UN-03 and UN-06 modules.
Use space bar to enter the system.
Go to CREW TRACKER.
Hold R and deliver LIVE DATA to EMMA.
Give her the LOCATION and VITAL STATISTICS.
Press space bar to get back to the crew list and deliver information about Josh to Emma.
You will gain access to cameras in Russian modules.
Switch to camera B.
You will see a laptop attached to the wall.
On the laptop, you will find a message from Stanislav (SL-EF - NEW ORBITAL PATH?).
In RUS-04, you will find a document on the wall (STATION FUNCTIONALITY REVIEW).
In RUS-05, there is a computer.
Connect it to the power supply and read the message from Mae (MM-JE - EMIGRATION TO CHINA).
Go to alerts, hit the first red square and inform Emma about the malfunctioning cameras in module RUS-06.
Emma will give you access to them.
A laptop is attached to the wall there.
You will find the pin written on the yellow paper on the casing - it’s 9338.
Hold R, hover on Jim and choose him.
This will inform Emma about his location.
She will ask you to bring up the hatch.
This site is not associated with and/or endorsed by the Devolver Digital or No Code.
All logos and images are copyrighted by their respective owners.
