Emma will reboot your system.
She will give you a short tutorial how to use it.
Press W to move forward.
Turn the mouse by 180 degrees and return to previous spot.
Q and E are used for rotating.
Find the item on the table.
Hold R and smack the left mouse button to check whether the notification system is working.
you might use space bar to return to the station map.
The location of the SPHERE will be marked on the map.
Go back to the SPHERE by clicking on the CONNECTION SPHERE.
Now, you must activate the reactor located in module EAS-01.
Use SPHERE to ride into EAS-10.
There you will find a laptop.
The power supply is nearby.
Plug into the socket, turn it on.
In the same room you will also find a unit called EMU CALIBRATION UNIT.
Connect to it and use SPHERE to move to module EAS-05.
The power will be lost, but Emma will turn it back soon.
Connect to the laptop located there and read the message (JR-MM - SPHERE USE CLEARED).
In this module, you will also find a rig called RMS ARM STATION.
Connect to it and you will gain a file named RMS DATA LOG.
On the laptop near the hatch you will find a document with the EAS HATCH SCHEMATIC.
The nearby hatch is blocked (the panel is highlighted in red).
You will have to unlock it with a circuit named L3.
Press the spacebar to switch to the EAS-02 camera.
Hover the mouse over correct fields while holding the left mouse button.
Use AWSD keys to mark the diagram.
Once you unlock the panel, bring up the hatch.
Switch back to SPHERE and move to EAS-01.
Connect to it, select ENABLE CONTAINMENT, and then on INJECT PLASMA.
You will have 49 seconds to complete this task.
Mark the square number 02 with the left mouse button.
The W and S keys change the range of magnets energy.
Press W or S until the word SAFE appears next to a number.
When all of the energy is contained in the circle, tap on REDIRECT POWER.
The reactor will be launched correctly.
The power will turn on and suddenly turn off.
A black hexagon will appear in front of Emma.
It will show you three pictures assigned to numbers or letters.
Repeat them in the correct order and press enter.
This site is not associated with and/or endorsed by the Devolver Digital or No Code.
All logos and images are copyrighted by their respective owners.
